Empennage 38
Time logged: 110 hrs
- Entry Time spent
- Control Cover on the Tail 2.5 hrs
- Finishing up trim motor and rudder cable 2.5 hrs
- Final assembly: vertical stabilizer and rudder 7.5 hrs
- Rigging the elevator 4 hrs
- Elevator push rod 1 hrs
- Installed the elevator 2 hrs
- Installing horizontal stabilizer 1 hrs
- Trim motor install 0.5 hrs
- Elevator rivet filling 0.5 hrs
- Elevator trim tab install 2 hrs
- Trim motor wiring 1 hrs
- Mounting elevator tip 6 hrs
- Elevator tip forming and shortening rivets 2 hrs
- Elevator bottom skin, and trim motor hardware 3 hrs
- Elevator trim tab fitting problem 1 hrs
- Elevator skin fitting and safety wire 2 hrs
- Elevator skin prep and inspection hatch 2 hrs
- Vertical stabilizer complete 1.5 hrs
- Vertical stabilizer wiring 1.5 hrs
- Elevator rib1 rework and spar 2 hrs
- Vertical stabilizer rib1 and skin work 3 hrs
- Wiring delphi connector for tail light 1.5 hrs
- Vertical stabilizer spar riveting 1.5 hrs
- Horizontal Stabilizer Close 5 hrs
- Elevator spar part 1 4 hrs
- HS skin dimple and cleco 4 hrs
- HS skin dimple attempt 1.5 hrs
- HS spar riveting and skin prep (kinda) 3 hrs
- Clecoing and adjust HS front spar 2 hrs
- Back to HS front spar 3 hrs
- Starting on vertical stabilizer 8 hrs
- Installing Taillight 1 hrs
- Rudder assembly 10 hrs
- Horizontal stabilizer spar 3 hrs
- Balance counterweigh assembly & main spar 6 hrs
- Countersink, more cleaning, and clecoing 2 hrs
- Parts cleaning and priming 3 hrs
- Empennage arrived!! 3 hrs