Post

Throttle Cable and Fire Extinguisher

control_system throttle engine
Posted Updated 1.5 hrs
1 min read
Throttle Cable and Fire Extinguisher

TLDR

  • Tightened the throttle cable connection on engine
  • Installed a small fire extinguisher in cockpit

Details

Throttle Cable

Before I adjusted the throttle idle position, I intentionally did not torque the throttle cable. This was completed today.

There were just a few bolts holding the throttle cable on the engine’s throttle assembly. I used 2 10mm wrench to tighten them and applied torque seal.

Fire Extinguisher

I bought a H3R halon fire extinguisher, and installed it into the cockpit just between the 2 rear passenger seats.

Drilled 2 AN3 holes on the center channel cover

Installed

This post is licensed under CC BY 4.0 by the author.